Need help?Do you have a question about the Sartorius Signum 3 and is the answer not in the manual?
Critical safety warnings and precautions for handling and servicing Signum series scales to prevent harm.
Procedures for calibration and adjustment using default or user-defined weights and linearization methods.
Instructions for inputting specific calibration and linearization weights for accurate scale setup.
Steps for setting and clearing the preload value on Sartorius Signum scales.
Procedures for safely opening and reassembling the display unit for maintenance.
Explains the function and proper use of service switches (menu access, flash) for interacting with the scale's service software.
Covers boot switch operation and setting the XBPI-232 protocol for scale programming and calibration via service software.
To Next Page
General