Connecting with Sartorius Lab Printer YDP30, YDP40
Printer YDP30, YDP40
Off
Mini-A Type-B
2)
Device
(Slave)
Printer equipment
supplied
t Connect the balance to the Sartorius printer using the supplied USB connection
cable.
y The balance detects the printer automatically. No settings need to be changed.
Connections for RS-232 Configuration “9-Pin”
Printer YDP 20-0CE
Second display YRD03Z
USB-RS 232 SBI
USB-RS 232 xBPI
Off
Mini-A
RS 232
9-pin
Sartorius order no.:
YCC03-D09
3)
Serial
device
t Connect the peripheral device to the balance via Sartorius connection cable
YCC03-D09 (RS-232, 9-pin, assigned as per PC).
t Define the desired system settings:
See “USB Port” on page 36.
Connections for RS-232 Configuration “25-pin”
(Printer YDP20-0CE)
(Second display YRD03Z)
USB-RS 232 SBI
USB-RS 232 xBPI
Mini-A Off
Mini-A
RS 232
25-pin
Sartorius order no.:
YCC03-D25
4)
Serial
device
t Use Sartorius connection cable YCC03-D25 (RS-232, 25-pin, Sartorius-specific
assignment) to connect the peripheral device to the balance.
t Implement the required system settings:
See “USB Port” on page 36.
To Next Page
Loading...
