Need help?Do you have a question about the Sartorius MC 410 S and is the answer not in the manual?
General| Maximum Capacity | 410 g |
|---|---|
| Readability | 0.001 g |
| Pan Size | 90 mm |
| Calibration | External |
| Display | LCD |
| Linearity | ±0.002 g |
| Repeatability (Std. Dev.) | 0.2 mg |
| Interface | RS-232 |
| Power Supply | AC adapter or battery |
Provides detailed diagrams of balance components for different models.
Lists all components included in the balance package for various models.
Covers installation requirements, ambient conditions, and AC power connection.
Covers weighing electrostatically charged and magnetic samples.
Explains the meaning of various codes and symbols shown on the balance display.
Details simple weighing, taring, and weighing range structures.
Outlines the purpose and criteria for automatic and manual calibration.
Step-by-step guides for performing internal and external balance calibration.
Explains the program for correcting mass values due to air buoyancy.
Details procedures for measuring sample differences before/after treatment.
Describes how to check if products fall within specific tolerance limits.
Explains how to perform piece counts based on a reference sample.
Information on connecting the balance to computers or peripherals.
Lists common problems, their causes, and solutions for the balance.
Configuration options for baud rate, parity, handshake, and stop bits.
Comparative table of technical specifications for various balance models.
Lists available optional accessories for enhancing balance functionality.
General safety guidelines for operating and maintaining the balance.
Regulatory compliance information and EC directives for the equipment.
To Next Page