Mass Unit Conversion by Toggling
You can have the weight displayed in milligrams
or grams.
To select the weight units one after the other, press the
w key (29) each time.
In addition to milligrams and grams, the standard
balances give you a wide variety of other menu-
definable international weight unit options.
For more information, refer to part 2, “Balance
Operating Menu.”
Displaying the Balance Model and Serial Number
on the Weight Display
– Turn off the balance display
– Turn it back on
– While all segments are displayed, briefly press
the p key (24)
– The balance model is displayed
(example: model “MC 5”)
– Press the c key (32) to have the serial
number displayed
– Press c to quit this function
1–29
To Next Page
Loading...
