Need help?Do you have a question about the Sartorius MC 5 and is the answer not in the manual?
Outlines the order of checks and adjustments for the microbalance.
Details the procedure to verify the balance's repeatability using a 5g weight.
Procedure to check the null indicator for proper stabilization between overload stops.
Procedure to check linearity by applying known weights and observing display values.
Procedure to adjust linearity using menu codes and external weights.
Steps to overwrite internal linearity weight using PSION server or PC CAS program.
Steps to overwrite internal calibration weight using PSION server or PC CAS program.
Outlines the order of checks and adjustments for the microbalance.
Details the procedure to verify the balance's repeatability using a 5g weight.
Procedure to check the null indicator for proper stabilization between overload stops.
Procedure to check linearity by applying known weights and observing display values.
Procedure to adjust linearity using menu codes and external weights.
Steps to overwrite internal linearity weight using PSION server or PC CAS program.
Steps to overwrite internal calibration weight using PSION server or PC CAS program.
General| Max Capacity | 5.1 g |
|---|---|
| Capacity | 5.1 g |
| Readability | 0.0001 mg |
| Calibration | Internal |
| Power Supply | 100-240 V, 50/60 Hz |
| Interface | RS232, USB |
| Operating Temperature | +10…+30 °C |
To Next Page