Sartorius MC 5 User Manual

Stand 1/94 SARTORIUS MC 5 Balance 19
MC 5
Accessing the Balance Operating Menu and Setting Menu Codes
- Using the key, turn the balance off and back on again.
- While all segments are displayed, press the key.
- If >> -L- << is displayed, change to >> -C- << using the menu
access key to unlock the menu.
- To select the desired number, press
the key to increase or
the key to decrease the number.
- To select the desired place - left - center - right - press
the key to move to the left
the key to move to the right.
- Press the key to confirm the code
entered; a >> ° << appears after the code.
For example, to assign >> 2-1-4° << to the key
(see „Balance Operating Menu“ in the instruction manual),
set >> 9-1° << to reset all parameters to the factory settings
(default settings).
- To store the code, exit the program by pressing the key.
- Reset the menu access switch back to "locked“ indicated by
>> -L- <<.“
- If you do not want to save changes to the menu codes, exit from
the menu by pressing
the key.

Sartorius MC 5 Specifications

General

Brand	Sartorius
Model	MC 5
Category	Scales
Language	English