Sartorius MC 5 - Installation Instructions

16 SARTORIUS MC 5 Balance Stand 1/94
MC 5
Installation Instructions
Important Note:
1. Use only the 7.5 DC
power supply, order no. 6971172 EURO or
order no.6971173 US/CDN
Do not use any other type of power supply or AC adapter;
otherwise this could cause problems with instability or drift!
2. Position the equipment to provide the required access for
operation.
Place the weighing cell on the left or the right of the display unit.
3. Mount the draft shield so that the periphery engages the
projected rim.
4. Attach the cable so that both units are directly connected without
the cable being kinked.
5. Level the weighing cell using the level indicator.