Key Functions
Function: Key(s):
Select memory location ID Numeric entry + F
Store tare value
●
- F
Store initial sample weight STO - F
Store residue (backweighed sample) RE S - F
Toggle between backweighing/standard w
weighing modes in the individual weighing mode
Toggling after backweighing between two w
calculated values and the “weighing mode”
Proceed from weighing-in to back- Numeric entry (memory
weighing in the combined weighing mode location ID no.) + F
Output of all values up to p
current operation
Cancel previous operation c
Delete stored data from the memory Press c >2 sec.
location displayed
Delete entire memory Press i >2 sec. and
then press STO - F
3–18
To Next Page
Loading...
