13
Operation with the Optional YAC01ED Display and Control Unit
Connect display and control supplied to the weigh cell electronic unit using cable.
Connecting cable: Approx. 1 meter long with 15-pin D-Sub plug and socket.
Pin 15 is not assigned.
Overview of Display and Operating Elements
Position Designation
1 Weight units
2 Menu level indicator
3 Tare | Zero
4 Symbol “GLP printing mode
active”
5 Symbol: “Printing mode active”
6 Application program active
7 Data output:
Press this key to send readout
values to the built-in data
interface.
8 Calculated-value indicator:
not a weight value
9 Start an application program
10 Display: Gross or net value
11 Select an application program |
Open the operating menu
12 Symbols for active application
(W, Z, L, V, R, A, C)
Position Designation
13 Clear Function
This key is generally used to
cancel functions:
– Quit application program
– Cancel calibration/adjustment
routine | Exit menu
14 Start the calibration process
15 On/off switch
16 Display: Calibration/adjustment
function
17 Symbols for zero range
(verified models only)
18 Weight value displayed in
selected weight unit
Symbol:
<< Exit menu
< One menu level higher
V Scroll through menu items
> To select the next sub-item
within a group
↵ To confirm the menu item
selected
To Next Page
Loading...
