ISO/GLP-compliant Data Records
An ISO/GLP*-compliant printout must include the
following data with each measurement:
– Weighing instrument manufacturer
– Weighing instrument model
– Weighing instrument serial number
– Date and time of the start and finish of each
measurement
– Operator/workstation ID
– Operator signature
§ To configure the data printer for ISO/GLP-compliant
data printouts, see “Settings for ISO/GLP-compliant
Data Records” in the chapter entitled “Configuration”
on page 61
§ The corresponding settings must be configured in the
weighing instrument as well. Refer to the section on
ISO/GLP-compliant records or printouts in the weighing
instrument instruction manual for details.
* ISO: International Organization for Standardization
GLP: Good Laboratory Practice
20
To Next Page
Loading...
