6 Operating Instructions YTM15MA
Safety Instructions
2.3 Hot Surfaces
During operation, parts of the device can heat up,
thereby making their surfaces hot. There is a danger
of burns to the body parts that touch these surfaces.
t Avoid contact with hot surfaces.
t Before working with the device: Allow the heating
element and device equipment to cool.
t Do not insert the adjustment disk immediately
after drying.
t Always use the removal tool to transport the
adjustment disk or remove it from the moisture
analyzer after a measurement.
t Allow the adjustment disk to cool on a clean,
temperature-resistant pad before or after
completion of a measurement.
t After cooling, place the adjustment disk back into
the carrying case and store it in a dust-free and
protected location.
t Wear personal protective equipment.
To Next Page