Satec EM133 User Manual

BG0491 REV. A12
EM13x Series
SMART MULTIFUNCTION METER
Installation and Operation Manual

Satec EM133 Specifications

General

Brand	Satec
Model	EM133
Category	Measuring Instruments
Language	English

Summary

Quick Start Guide

Installing the EM13X SERIES

Chapter 2 Installation

2.4 Electrical Installation

Covers wiring configurations, conductor sizes, torque values, and general electrical installation instructions.

2.7 Communications Connections

Explains how to connect communication modules like RS-485, Ethernet, PROFIBUS, and GPRS.

Chapter 3 Using Front Display

3.3 Programming Mode

Explains how to enter and navigate the meter's programming mode using the front panel buttons.

Chapter 4 Using PAS Software

4.1 Installing PAS

Chapter 5 Configuring the EM13X Series

5.1 Configuring Communications

Details how to set up serial ports, Ethernet, GPRS, and other communication interfaces.

5.2 General Meter Setup

Covers basic meter configuration, including wiring mode, PT/CT ratios, and demand period settings.

Chapter 6 Device Control and Upgrading

6.1 Resetting Accumulators, Maximum Values and Files

Provides methods for resetting meter data like demands, logs, and counters via front display or PAS.

6.6 Upgrading Device Firmware

Chapter 7 Monitoring Meters

7.1 Viewing Real-time Data

Describes how to retrieve and view live measurement data from the meter using PAS.

Chapter 8 Retrieving and Storing Files

8.2 Using the Upload Scheduler

Chapter 9 Viewing Files