Need help?Do you have a question about the Satec PM130EH SERIES and is the answer not in the manual?
General| Display | LCD |
|---|---|
| Frequency | 50/60 Hz |
| Communication | RS-485, Modbus RTU |
| Digital Outputs | 2 relay outputs |
| Data Logging | Yes |
| Measurement Type | Power, Energy, Harmonics |
| Current Input | 1A or 5A |
| Mounting | Panel Mount |
| Power Supply | 85-265V AC/DC |
| Digital Inputs | 2 |
| Analog Outputs | Up to 4 |
| Operating Temperature | -20 to 70°C |
| Dimensions | 96 x 96 mm |
| Weight | 0.5kg |
Explains addressing schemes for PM130EH Modbus registers, including offsets.
Describes data formats (16-bit integer, 32-bit modulo 10000, 32-bit long integer) and scaling methods.
Provides a detailed list of basic data registers, their addresses, parameters, types, units, and scales.
Lists setup registers for wiring mode, PT/CT ratios, demand periods, and averaging buffer.
Details registers for configuring interface, address, baud rate, and data format for communication.
Lists all measured data registers, their point IDs, and how to re-map them for access.
Details registers for configuring alarm and event setpoints, including trigger parameters and actions.
To Next Page
