Need help?Do you have a question about the Satec PM130 PLUS and is the answer not in the manual?
General| Brand | Satec |
|---|---|
| Model | PM130 PLUS |
| Category | Measuring Instruments |
| Language | English |
Describes the meter's capabilities, models, and key components.
Lists all parameters the meter can measure and display.
Details how to physically mount the meter in a panel or on a DIN rail.
Covers wiring and power connections for safe and correct operation.
Explains how to connect the meter for data transfer via serial or network ports.
Explains the meter's physical buttons, LEDs, and display elements.
Describes how measurement data is presented on the meter's display.
Guides users through the meter's navigation and setup menu system.
Instructions for setting up the configuration and data acquisition software.
Details how to establish communication between PAS and the meter.
Settings for serial, Ethernet, GPRS, and other communication interfaces.
Basic configuration of the meter's operational parameters and network settings.
Settings for energy billing, tariffs, and time-of-use data.
Setup for data logging and event recording parameters.
Details on configuring Modbus, DNP3, and other communication protocols.
How to clear meter data, logs, and accumulated values.
Process for updating the meter's software via the PAS application.
Instructions for monitoring live measurements from the meter using PAS.
How to analyze voltage and current waveforms captured by the meter.
Analyzing harmonic distortion in power signals using the meter's data.
Downloading logged data from the meter to a PC.
Converting meter data into formats like COMTRADE, PQDIF, or Excel.
Customizing how data files are displayed in the PAS application.
Reviewing recorded measurement data in tabular or graphical format.
Detailed electrical input specifications for voltage and current.
Performance metrics and accuracy for meter measurements.
To Next Page
