Chapter 4 Using P A S S O F T W A R E Authorization
PM130 PLUS Powermeter Series 67
1. Check the On-line button on the toolbar.
2. Select the device site from the list box on the toolbar.
3. Select Upload Setups from the Meter Setup menu.
4.5 Authorization
If communications with your meter is secured, you are prompted for the
password when you send new setup data to the meter.
Figure 4-5: Authorization Dialog Box
o Enter the password
and click OK.
If your authorization was successful, you are not prompted for the
password again until you close the dialog box.
See Configuring Meter Security in Chapter 5 for more information on the
meter password security.
To Next Page
Loading...
Need help?
General
