2 EM13x Series SMART MULTIFUNCTION METER
LIMITED WARRANTY
The manufacturer offers the customer a 24-month functional warranty on
the instrument for faulty workmanship or parts from date of dispatch from
the distributor. In all cases, this warranty is valid for 36 months from the
date of production. This warranty is on a return to factory basis.
The manufacturer does not accept liability for any damage caused by
instrument malfunction. The manufacturer accepts no responsibility for
the suitability of the instrument to the application for which it was
purchased.
Failure to install, set up or operate the instrument according to the
instructions herein will void the warranty.
Only a duly authorized representative of the manufacturer may open your
instrument. The unit should only be opened in a fully anti-static
environment. Failure to do so may damage the electronic components and
will void the warranty.
The greatest care has been taken to manufacture and calibrate your
instrument. However, these instructions do not cover all possible
contingencies that may arise during installation, operation or
maintenance, and all details and variations of this equipment are not
covered by these instructions.
If the equipment is used in a manner not specified by SATEC LTD, the
protection provided by the equipment may be impaired.
For additional information regarding installation, operation or maintenance
of this instrument, contact the manufacturer or your local representative
or distributor.
All trademarks are property of their respective owners.
Copyright 2007-2017 SATEC LTD.
To Next Page
Loading...
Need help?
General
