EasyManua.ls Logo

Satel PERFECTA - WARNING; Factory Default Codes; Symbols Used in Manual

Satel PERFECTA
10 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Changes, modifications or repairs not authorized by the manufacturer shall void your rights
under the warranty.
Hereby, SATEL sp. z o.o., declares that this control panel is in compliance with the
essential requirements and other relevant provisions of Directive 1999/5/EC. The
declaration of conformity may be consulted at www.satel.eu/ce
SATEL's goal is to continually upgrade the quality of its products, which may result in some
changes of their technical specifications and firmware. The current information on
the introduced modifications is available on our website.
Please visit us:
http://www.satel.eu
ATTENTION!
The alarm system cannot prevent burglary or robbery. Its purpose is to signal
emergency situations. It should be installed by qualified professionals who will inform
you about the principles of its operation and provide regular maintenance and testing.
We recommend that the alarm system be regularly tested to make sure that it will react
properly in case of burglary or robbery.
The following symbols may be used in this manual:
- note,
- caution.

Other manuals for Satel PERFECTA

Related product manuals