Need help?Do you have a question about the Satel Integra 64 and is the answer not in the manual?
Learn how to configure the control panel using the keypad, including service mode access.
Guide to navigating the DLOADX software for panel configuration and settings.
Configure parameters for modem, Ethernet, and cellular data network communication.
Procedures for performing programming tasks locally via RS-232 or remotely.
Define and configure partitions and zones for system organization and detection.
Setup and configuration of ABAX wireless devices and system integration.
Define parameters, functions, and triggering events for system outputs.
Program timers and user schedules for automated system operations and access.
Configure general system-wide settings and operational parameters.
Settings for telephone line and GSM communicator for system communication.
Setup event reporting to monitoring stations via various transmission paths.
Configure system notifications via voice, pager, or SMS messages.
Configure keypad settings, state inspections, and define user functions.
Enable phone call answering and remote control of system outputs via telephone.
Operate the control panel and manage functions using SMS commands.
Procedure for updating the control panel's firmware using the FLASHX program.
Record of firmware versions and introduced changes to the manual.
General| Zones | 64 |
|---|---|
| Maximum Number of Programmable Outputs | 64 |
| Timers | 8 |
| Battery Backup | 7Ah |
| Keypads | 8 |
| Communication Modules | GSM |
| Communication Interfaces | RS-232 |
To Next Page
