Need help?Do you have a question about the Satel Integra 128-WRL and is the answer not in the manual?
General characteristics and flexibility of INTEGRA control panels.
Steps for updating control panel firmware using the RS-232 port.
Configuring the system via LCD keypad through service mode menus.
Using DLOADX for local and remote programming via various connections.
Visualizing and controlling the system using the GUARDX software.
Operating the system via web browser or mobile phone interface.
Adding, deleting, and configuring wireless detectors, key fobs, and sirens.
Detailed configuration for various wireless detector types (e.g., APD-100, AMD-102).
Configuring wireless sirens and 230V AC wireless controllers.
Defining system objects, partitions, and their types for security management.
Setting up zone parameters, types, detectors, and end-of-line resistors.
Defining output parameters, types, sources, and testing procedures.
Functions and display options of the LCD keypad interface.
Managing user access levels, codes, and system prefixes.
Setting up reporting to monitoring stations via various communication methods.
Configuring voice, PAGER, and SMS messaging for event notifications.
Enabling and configuring automatic call answering and remote output control.
Activating and programming SMS commands for system control.
Guidelines for meeting specific security standards and requirements.
Summary of changes and improvements across firmware versions.
General| Number of Zones | 128 |
|---|---|
| Partitions | 8 |
| Programmable Outputs | 8 |
| Operating Temperature Range | -10°C to +55°C |
| Outputs | 16 |
| Communication | GSM, Ethernet, PSTN |
| Backup Battery | 12 V, 7 Ah |
| Compatible Devices | SATEL devices, wireless sensors, wired sensors |
To Next Page
