Need help?Do you have a question about the Satel Integra 24 and is the answer not in the manual?
Settings for DLOADX communication via modem, Ethernet, and cellular data.
Details parameters and options for various LCD keypad models.
Configuration for ABAX system, wireless devices, and response periods.
Settings for ABAX system, including partition assignment and response periods.
Configuration options for wireless devices like detectors, sirens, and expanders.
Settings for reporting via telephone, Ethernet, cellular data, and SMS.
Overview of transmission paths for event codes: ETHM, GSM, SMS, and analog telephone.
Settings for call answering and remote control functions via telephone.
Settings for call answering and remote control functions, including partition status and user assignments.
Configuration for operating the control panel via SMS messages.
Steps to update control panel firmware using FLASHX program and STARTER.
Parameters and options for ABAX system devices and configurations.
Configuration parameters for the GSM module, including PIN, PUK, and network settings.
Settings for GSM communicator, including PIN, PUK, modem format, and GPRS.
Configuring station selection, dual path reporting, and telephone/backup settings.
Parameters for ETHM/GPRS server, keys, IP format, and identifiers.
Settings for SIA-IP reporting, including MAC address, timestamp, encryption, and supervision.
Settings for SMS reporting format and message content for INTEGRA 128-WRL.
General| Number of Zones | 24 |
|---|---|
| Number of Outputs | 8 |
| Backup Battery | 12V 7Ah |
| Operating Temperature Range | -10°C to +55°C |
| Supported Protocols | Contact ID |
To Next Page
