Need help?Do you have a question about the Satel PERFECTA-T and is the answer not in the manual?
Details the physical description of keypads, including LED indicators for system status.
Describes the information displayed on the keypad screen, including zone status symbols.
Explains the primary and secondary functions of each key on the keypad.
Details the audible beeps generated by the keypad for various system events and operations.
Lists the default service and user codes pre-programmed in the control panel.
Explains various arming methods, including full, day, and night modes, with or without partition selection.
Details common issues that may prevent the system from arming and troubleshooting steps.
Describes how to disarm the system and clear triggered alarms without partition selection.
Explains how to clear alarms without disarming the partition.
Provides a comprehensive list of user functions accessible via the keypad and their corresponding key sequences.
Details the process of adding new users, editing existing ones, and managing their rights.
Explains how to add, configure, and remove key fobs for system operation.
Explains how to inhibit or isolate zones to prevent them from triggering alarms.
Guides users on how to check the system's current state, including alarms and troubles.
Explains how to view and clear the system's trouble memory.
Explains how to activate or deactivate outputs for connected devices via the keypad.
Details procedures for conducting zone tests, output tests, and signal level checks.
Provides instructions for safely replacing the battery in a wireless keypad.
Defines rules for service access and how to enter service mode for configuration.
Explains how to use the remote listening feature to monitor protected areas.
Details how to operate the system using MPT-350 or other SATEL 433 MHz keyfobs.
Describes the different sound and flash patterns used by sirens for various alarm events.
General| Type | Control Panel |
|---|---|
| Wired zones | 8 |
| Wireless zones | 24 |
| Number of Partitions | 4 |
| Humidity | Up to 93% non-condensing |
| Communication | GSM |
| Power Supply | 12 V DC |
| Battery Backup | 12V |
| Operating Temperature | -10°C to +55°C |
To Next Page
