SATEL PERFECTA-T 17
10. Assign partition(s) to which the user is to have access. The user should have access to at
least one partition.
11. Press to confirm partition selection.
tering the user data will be displayed. 12. Functions that allow en
13. Press to run 8.NAME function.
14. Enter the user name.
15. Press to save the name.
16. Functions that allow entering the user data will be displayed.
17. Press to finish adding the user.
changes will be displayed. 18. Prompt for saving the
19. Press to save changes.
6.9.2 Editing a user
1. Enter the user menu and press in turn to run 2.EDIT USER function.
2. Use the
or key to select the user you want to edit.
3. Press
to start editing the selected user.
4. Functions that allow editing the user data will be displayed.
ame way as when adding
s
5. Use available functions to modify the user data (proceed in the s
a user).
6. Having made all changes, pres to finish editing the user.
nges will be displayed. 7. Prompt for saving the cha
8. Press to save changes.
6.9.3 Removing a user
1. Enter the user menu and press in turn to run 3.REMOVE USER function.
2. Use the or key to select the user you want to remove.
3. Press
to remove selected user.
6.9.4 Adding keyfob
You can add a keyfob when adding or editing a user.
1. Press
to run 4.ADD KEY FOB function.
ompt you for what to
eing added will be displayed.
2. Press twice any button of the keyfob (messages on the display will pr
do next).
3. Type and serial number of the keyfob b
4. Press
to add the keyfob.
6.9.5 Configuring keyfob settings
s
You can configure a keyfob when adding or editing a user.
1. Run BUTTON ○ function.
e the or key to select operation that control panel is to perform after the
the installer.
2. U
button ○ is pressed on the keyfob.
For information on zone types and output functions, please consult
3. Press to confirm the selection.
4. Functions that allow entering / editing the user data will be displayed.
5. Configure settings of the other keyfob buttons in the same way.
To Next Page
Loading...
