24 PERFECTA-T SATEL
The keyfob can start up to 6 functions. For information about functions assigned to individual
buttons / button combinations, please consult the person who has configured the keyfob
settings.
The alarm system may be configured so that, in some circumstances, arming the
system by using the keyfob will fail (see “System problems and arming failure”).
Consult the installer to learn how you are to be effectively notified of the system
arming failure.
9. Sirens
The main task of the siren is to provide information about emergency situations by means of
sound or light signals. The installer can configure the alarm system so that the siren will
additionally signal the following:
1 sound / flash – starting the arming procedure (if the exit delay time is 0, the system is
armed immediately),
2 sounds / flashes – disarming,
4 sounds / flashes – clearing alarm,
7 sounds / flashes – arming with keyfob is impossible or the arming procedure has failed.
The signaling is triggered if a keyfob or zone is used to arm / disarm the system or clear
alarm.
To Previous Page
Loading...
