Satel Integra 24 - Keypad Parameters and Options

SATEL INTEGRA 11
Pulses count
Type
Entry delay / Alarm delay / Surveillan. time / Signal. delay / Bypass time /
Expander number / Arming mode / Group / Exit delay / Outputs group
Max.viol.time / Max.opening t.
Max.n-viol.time
No viol [min]
Partition
Power up delay
Priority / Disrm.on viol.
Chime in exp. / No al. in kpds.
Video, disarmed
Video, armed
Bypass disabl.
Bypass no exit
Bell delay / Alarm if armed / Clear alarm / Restore=disarm / Alarm / Arm
2,3=delay
Auto-reset 3
Auto-reset 1
Auto-rst. clr
Pre-alarm / Attend verif. / No restore ev.
Abort delay / Part. tmp. block / Event arm fail / No viol.monit. / Arm-inactive /
Disarmd-monit.
Rest.after bell
Rest.aft.dis.
Al.on exit end / Log events / No bp. if armed / Abort voice m.
Al.aft.unbps. / Event in arm
Tamp. alw. loud
Monitor. delay / Chk. if can arm / Restore=bps.v. / Bypass verif.
Name
Parameters
Partition
EOL
Sensit. [x20ms]
Type
Entry delay
Max.violat.time
Max.no-viol.t.
Zone options
[select option]
Counters
Counter n [n – counter number]
Max. value
Counting time
Omit recurs
Bypasses
Group n [n – number of bypassed group of zones]
Zones
Bypass on/off
Test
SIGNAL. OUTPUT
[select zone]
Names