SatLab Freyja GNSS RTK - Work Mode

Freyja GNSS RTK System User Manual
www.satlab.com.se 12
5. Satellites list
Shows the satellite’s tracked information.
Figure 2-3-12 Satellites list
2.3.3 Work mode
1. Rover
Set up the rover’s data link and parameters. The rover station data link includes: Internal UHF.
Figure 2-3-13 Rover
2. Base
Set up the data link and parameters of the base and get the point coordinates by averaging. The base
station data link mode includes: Internal UHF.