Satlink ST-8802 - Specifications; Input and Output Specifications; General Specifications; Video Quality Considerations

Specifications
Note: Specifications are subject to change without notice.
Note: In order to display video normally on TV
• Signal accepted by the TV must comply with standard MPEG-2 or MPEG-4 encoding
• The video content is not protected under High-Bandwidth Digital Content Protection (HDCP)
agreement
■ Video Quality
Video and audio quality are optimized by determining the size and the speed to transmit MPEG
packets to the TV. The packet latency and delay variation are adjusted automatically by the
Channel Filter to reach the best quality and performance on the TV.
8
ST-8802 Digital TV Channel Filtering Optimizer/Encoder
All Input Ports
12 VDC, 1.5A
10.25" x 7" x 1.75" (230 x 177 x 44 mm)
2.58 lbs (1.15 kgs)
5 to 50 °C (Opera�on)
-20 to 80 °C (Storage)
General
Power Supply
Dimensions with Rack
Weight
Temperature
>32 dB
Output MER
Gain
VHF 35 dB, VHF 45 dB
Gain Control
Channel AGC
Aenuator
0 to 31 dB
Electrostac Discharge
Protecon (ESD)
Input and Output
174 to 862 MHz
max 113 dBµV
Output Frequency
Output Level
Input Level
45 to 109 dBµV
Interface
Input 75Ω F x 4, Output 75Ω F x 1, -20dB Test 75Ω F x 1