GL408e / GL412e Barcode printer
Installation
2006-11-28 11
5 Installation
Place the printer in a level place
If installed in a rough or slanting place, quality printing will not be
available. It may cause malfunction and shorten the life of the
printer.
Use a stable platform
Use a stable platform. Do not carry the printer with the media
inside. Do not rock the printer.
Avoid high heat and humidity
Do not install in a place of high temperature or humidity. High
temperature or humidity may cause malfunction.
Avoid dust
Dust may deteriorate the quality of printing. It may cause
malfunction and shorten the life of the printer.
Avoid direct sunlight
Since this product is provided with optical sensors. Direct sunlight
may cause erroneous operation. Ensure that the cover is closed
when printing.
Do not place the printer near cranes or compressors
Equipment using large capacity of electricity, such as cranes and
pressing machines, may cause electric noise or under-voltage.
Since it may cause malfunction, do not place this product near that
kind of equipment.
To Next Page
Loading...
Need help?
General
