GL408e / GL412e Barcode printer
Transport and storage
2006-11-28 9
Electric current
DANGER!
Danger to life caused by electric current!
Touching conductive parts causes a direct danger
to life. Damage to insulations or individual
components can cause danger to life.
Therefore:
– In case of damage to insulation switch off the
power supply immediately and have the
defective parts repaired.
– Work on the electric system must only be
carried out by skilled electricians.
– De-energize the machine for all work on the
electrical system.
– Switch off the power supply and secure against
switching on again before maintenance,
cleaning or repair work.
– Do not bridge fuses or make them ineffective.
When changing fuses make sure you use the
correct amperage.
– Keep moisture away from conductive parts. This
can cause short circuit.
Simplified cutter
CAUTION!
Risk of injury at the simplified cutter!
The simplified cutter used to cut the labels may
cause cuts and skin abrasions.
Therefore:
– Use caution when working in the proximity of
the simplified cutter.
– When in doubt, wear protective gloves.
3 Transport and storage
3.1 Transport information
Unplug the power cable before transporting the printer.
3.2 Storage
When storing the printer for an extended period of time, protect
it against influences such temperature, sun exposure, and
moisture.
To Next Page
Loading...
Need help?
General
