CONTROLS
In
case
the
starter switch turns off under
the
high speed running
of
the
engine, it will
be
caused
to
have a trouble of "DIESELING".
Control System
of
the engine and tractor are as shown
in
Figs. 7
through 12.
1.
OIL
PRESSURE WARNING LAMP
When
the
starter switch
is
set
to
"ON",
the
oil pressure warning lamp
is
--
turned on. Always
the
lamp should be watched, because it indicates
whether
the
engine
is
properly lubricated. Normally, after
the
engine ·
started,
the
lamp
is
turned
off. If the. lamp keeps
to
light
on
during
operation,
the
engine oil may be insufficient or
the
oil pressure switch
·-
is
faulty.
Stop
the
operation, and check
quantity
of
the
oil and
the
oil
pressure switch condition.
Fig. 5
Instrument
Panel and
Control
System
Indicator
Instrument
(A)
Oil
Pressure Warning
Lamp
(B)
Battery
Charge Warning
Lamp
(C)
Water
Temperature
Warning
Lamp
(D)
Lighting
Switch
(E)
Tractor
Meter
(F)
Throttle
Lever
(G)
Starter
Switch
(H)
Choke
wire
2. BATTERY CHARGE WARNING LAMP
page
6
When
the
starter
switch
is
turned
to
"ON",
the
lamp
is
turned on.
After starting
the
operation,
the
lamp
is
turned
off. The lamp indicates
whether
the
battery
is
being correctly charged. If the lamp lights on
during operation,
the
fan belt may be slipping or damaged, or the
charging circuit
is
faulty.
Stop
the operation immediately, and check
the
possible cause.
To Next Page
Loading...