-
3. WATER TEMPERATURE WARNING LAMP
Dust accumulations will adversely affect the radiation efficiency of
the
radiator. If
the
water
temperature
in
the
radiator exceeds 212°F
(100°C)
or
if
the
water in
the
radiator
is
insufficient,
the
lamp
is
turned
on. Immediately
stop
the
engine and make it cool.
Then
check
the
radiator for dust and water. If necessary, clean
the
radiator
or
feed
the
water.
4.
LIGHTING
SWITCH
AND
FLOOD
LIGHT
0 - Lights are off.
5.
1 - Headlight
is
on.
2-
Headlight
is
dimmed and directed downward.
The
switch for
the
implement light
is
incorporated
in
the
light itself.
Fig. 6
Lighting
Switch
TRACTOR METER
The
calibration along
the
lower rim of
the
meter shows travelling speeds
(mph)
at
the
6th
forward gear.
The
figure in
the
center of
the
meter
shows
the
accumulated hours of
tractor
running with engine revolution
at 2,800 rpm. Periodical checks are based
on
the
accumulated hours
in
this meter.
The upper calibration indicates
the
engine rpm, and
the
red line (2,800
rpm) shows
that
when.
the
P.T.O. gear
is
in
"1st",
the
P.T.O. shaft
rotates
at
540
rpm
and
with
the
P.T.O. gear
in
"2nd",
the
shaft rotates
at
1
,092
rpm. ·
The
left
one
of
the
three
lamps arranged along
the
upper
rim
is
the oil
pressure warning lamp,
the
center
is
for
the
battery charge warning
lamp, and
the
right
is
for
the
water
temperature
warning lamp.
page
7
To Next Page
Loading...