Windshield Washer Fluid
What to Use
When you need windshield or rear window (wagon
models) washer fluid be sure to read the instructions
before use. If you will be operating your vehicle in
an area where the temperature may fall below freezing,
use a fluid that has sufficient protection against
freezing.
Adding Windshield Washer Fluid
Open the cap with the
washer fluid symbol
printed on it and add
washer fluid until the tank
is full.
Notice:
• When using concentrated washer fluid, follow
the manufacturer’s instructions for adding
water.
• Do not mix water with ready-to-use washer fluid.
Water can cause the solution to freeze and
damage your washer fluid tank and other parts
of the washer system. Also, water does not
clean as well as washer fluid.
• Fill your washer fluid tank only three-quarters
full when it is very cold. This allows for
expansion if freezing occurs, which could
damage the tank if it is completely full.
• Do not use engine coolant (antifreeze) in your
windshield washer. It can damage your washer
system and paint.
5-40
To Next Page
Loading...
Need help?
General
