EQ (Equalization): Press this button to select preset
equalization settings.
To return to the manual mode, press the EQ button until
Manual displays or start to manually adjust the bass,
midrange, or treble by pressing the
f knob.
Adjusting the Speakers (Balance/Fade)
BAL/FADE (Balance/Fade): To adjust balance or fade,
press the
f knob until the speaker control tabs display.
Continue pressing to highlight the desired tab, or press
the pushbutton positioned under the desired tab. Turn
the
f knob clockwise or counterclockwise to adjust the
highlighted setting. The highlighted setting can also
be adjusted by pressing either SEEK arrow,
\ FWD
or
s REV button until the desired levels are obtained.
To quickly adjust balance or fade to the middle position,
press the pushbutton positioned under the BAL or FADE
tab for more than two seconds. A beep sounds and the
level adjusts to the middle position.
To quickly adjust all speaker and tone controls to the
middle position, press the
f knob for more than
two seconds until a beep sounds.
Finding a Category (CAT) Station
CAT (Category): The CAT button is used to find XM™
stations while the radio is in the XM™ mode. To find
XM™ channels within a desired category, perform
the following:
1. Press the BAND button until the XM™ frequency
displays. Press the CAT button to display the
category tabs. Continue pressing the CAT button
until the desired category name displays.
2. Press either of the two buttons below the desired
category tab to immediately tune to the first XM™
station associated with that category.
3. Turn the
f knob, press the buttons below the right
or left arrows displayed, or press the SEEK arrows
to go to the previous or to the next XM™ station
within the selected category.
4. To exit the category search mode, press the FAV
button or BAND button to display your favorites
again.
3-63
To Next Page
Loading...
Need help?
General
