Turn Signal/Multifunction Lever
The lever on the left side of the steering column
includes:
• G Turn and Lane-Change Signals. See Turn and
Lane-Change Signals on page 3-7.
• 3 Headlamp High/Low-Beam Changer. See
Headlamp High/Low-Beam Changer on page 3-8.
• Flash-to-Pass Feature. See Flash-to-Pass on
page 3-8.
Turn and Lane-Change Signals
The turn signal has one upward (for right) and one
downward (for left) positions, which allow you to signal
a turn or a lane change.
To signal a turn, move the lever all the way up or down.
When the turn is finished, the lever returns automatically
to the original position.
An arrow on the instrument
panel cluster flashes in the
direction of the turn or
lane change.
To signal a lane change, slightly raise or lower the lever
until the arrow starts to flash and release the lever.
The turn signal flashes automatically three times.
As you signal a turn or a lane change, if the arrows
flash rapidly, a signal bulb may be burned out and other
drivers will not see your turn signal.
If a bulb is burned out, replace it to help avoid an
accident. If the arrows do not go on at all when you
signal a turn, check the fuse, see Fuses and Circuit
Breakers on page 5-97 and for burned-out bulbs.
3-7
To Next Page
Loading...
Need help?
General
