Storing a Flat or Spare Tire
and Tools
{CAUTION:
Storing a jack, a tire, or other equipment in the
passenger compartment of the vehicle could
cause injury. In a sudden stop or collision,
loose equipment could strike someone.
Store all these in the proper place.
To store the flat or spare tire and tools, do the following:
1. Place the wheel wrench into the bag and
use the straps to secure the bag to the fully
collapsed jack.
2. Install the jack between the back of the trunk and
the compact spare tire and secure with the wing bolt.
3. Reverse Steps 1 through 3 under Removing the
Spare Tire and Tools on page 5-77 to replace
the floor and lock in place.
4. Place the flat, or damaged tire, face down, on the
bottom of the spare tire compartment.
5-85
To Next Page
Need help?
General
