Front Turn Signal, Parking and
Fog Lamps
A. Front Turn
Signal/Parking Lamp
B. Fog Lamp
To replace one of these bulbs:
1. Open the hood. See Hood Release on page 5-11.
2. Locate the bulb assembly under the front bumper.
3. Turn the bulb socket counterclockwise and pull
out the bulb socket.
4. Disconnect the bulb socket from the electrical
connector.
5. Pull the old bulb straight out of the bulb socket.
6. Push the new bulb straight into the bulb socket until
it connects.
7. Reconnect the bulb socket to the electrical
connector.
8. Push the bulb socket and turn it clockwise to lock it
into place.
5-44
To Next Page
Loading...
Need help?
General
