Taillamps, Turn Signal, Stoplamps
and Sidemarker Lamps
To replace one of these bulbs:
1. Open the trunk. See Trunk on page 2-8.
2. From inside the vehicle, remove the two screws
from the taillamp assembly.
3. Pull the taillamp assembly upwards and sideways
to disengage it from the vehicle.
4. Remove the taillamp assembly.
5. Turn the bulb socket counterclockwise to remove.
6. Pull the old bulb straight out of the bulb socket.
7. Push the new bulb straight into the bulb socket until
it connects.
8. Push the bulb socket into the taillamp assembly
and turn it clockwise to lock it into place.
9. Push the taillamp assembly downwards and
sideways to reengage it to the vehicle.
10. Reinstall the two screws that hold the taillamp
assembly.
5-45
To Next Page
Loading...
Need help?
General
