2. Place the guide over the belt and
insert the two edges of the belt
into the slots of the guide.
3. Be sure that the belt is not
twisted and it lies flat. The elastic
cord must be under the belt
and the guide on top.
{ CAUTION
A safety belt that is not
properly worn may not provide
the protection needed in a
crash. The person wearing the
belt could be seriously injured.
The shoulder belt should go
over the shoulder and across
the chest. These parts of the
body are best able to take belt
restraining forces.
1-20 Seats and Restraints
To Next Page
Loading...
Need help?
General
