Removing the Spare Tire
and Tools
The equipment you will need is
located in the rear storage area.
1. Open the liftgate. See Liftgate
on page 2-6.
2. Lift the floor cover to access the
spare tire and tools.
3. Remove the foam pad. Turn the
retainer counterclockwise to
remove it.
4. Remove the spare tire by pulling
it up and out of the trunk.
5. The jack and tools are stored
below the spare tire.
6. The tools you will be using
include the jack (A), wheel
wrench (B), screwdriver (C),
and jack handle (D).
9-62 Vehicle Service and Care
To Next Page
Loading...
Need help?
General
