Setting Cruise Control
For safety reasons the cruise control
cannot be turned on until the brake
has been applied once.
With automatic transmission, only
use cruise control in D (Drive).
Press the On/Off button to turn on
the cruise control. A message briefly
appears on the instrument panel
cluster at the odometer display when
the cruise control has been turned on.
{ CAUTION
If you leave your cruise control on
when you are not using cruise,
you might hit a button and go into
cruise when you do not want to.
You could be startled and even
lose control. Keep the cruise
control switch off until you want to
use cruise control.
1. Press
J and the current speed
is stored and maintained.
2. Take your foot off the accelerator
pedal. The
J indicator light on
the instrument panel cluster turns
on after the cruise control has
been set to the desired speed.
The cruise control automatically
disengages under the following
conditions:
• The vehicle speed drops below
25 mph (40 km/h).
• The brake is applied.
• The clutch pedal is applied
(for manual transmission
vehicles).
• The automatic transmission is
in N (Neutral).
• The On/Off button is pressed.
CC On Message
CC Off Message
4-6 Instruments and Controls
To Next Page
Loading...
Need help?
General
