Notes when using
Check out that there is enough water in
the body of the boiler without failure.
Expansion tank type-Check out if there is
water in the Expansion tank, and in case
that there is no water, please ll water in
the body of the boiler.
Open Expansion Tank type-check out if
there is water in the expansion tank, and in
case that there is on water, press the power
button. Then, ‘Low Water Level’ lamp turns on
and water is supplied automatically.
Put the surroundings of the boiler in order
and don’t put the ammables near the boiler.
Check out whether the ignition and
the combustion is normal.(Checking through
the ame inspection window.)
When the boiler is going to be not in use for
a long time, cut o the power.(Don’t pull out
the power cord when there is a danger of freezing.)
If you pull out the power plug on time of
thunder and lightening, you can prevent the
damage on the boiler by the falling of the
thunderbolts.
Be careful not to get burned due to the
high temperature of the exhaust/inhale pipe
(exhaust pipe).
In case of emergency such as you may feel
the abnormality of the boiler, cut o the
power.
Don’t use the hot water for food.
6
To Next Page
Loading...