12
Design Standards
EMC Directive (Electromagnetic compatibility) 89/336/EC
Standards:
EN 61000-6-1: Electromagnetic Compatibility Generic Standard –
Immunity for residential, commercial and light industrial environments.
(Feb 2001)
EN 61000-6-3: Electromagnetic Compatibility Generic Standard – Emission
standard for residential, commercial and light industrial environments.
(Feb 2001)
LV Directive (Low voltage) 73/23/EEC
Standard:
EN 60335-1: Household and similar electrical appliances - Safety (May
2001)
Boiler Efficiency Directive 92/42/EEC
Standard:
BSEN 304: Oil boilers with forced draft burners.
Fuel Spillage
1. Switch off all electrical and other ignition sources.
2. Remove all contaminated clothing to safeguard against fire risk and skin
damage. Wash affected skin thoroughly with soap and water and remove
clothing to a safe well ventilated area and allow to air before cleaning.
3. Contain and smother the spill using sand or other suitable oil absorbent
media or non-combustible material.
4. Do not allow fuel to escape into drains or water courses. If this happens,
contact the relevant authorities in your area. (Ireland only). Contact the
Environment Agency on 0800 807060 (UK Only)
5. Consult local authority about disposal of contaminated soil, see
http://www.housing.gov.ie/local-government/administration/local-
authorities/local-authorities
INSTALLER SECTION
To Next Page
Loading...
