blinks when selecting
Boiler Temp. Mode
when blinks, set the desired
boiler temp. between 40~80˚C by
adjusting / button, after a while,
it is automatically saved. Boiler
temp. can be set by 1˚C. After the
required temperature has been
selected, is on and current
boiler water temp. is displayed.
Set the heating temp.
with / button.
Press the button.
The LCR-2WE room thermostat is designed to control a heating system
according to time and temperature, in connection with a valve controller
(red colored cable).
To Next Page
Loading...
