JOBNAME: 1st Edition PAGE: 40 SESS: 1 OUTPUT: Tue Jul 24 09:46:13 2007
Notice: SIO-ID=818300 LMD=22-apr-2004 If the jumper
cables are connected or removed in the wrong
order, electrical shorting may occur and damage the
vehicle. The repairs would not be covered by your
warranty. Always connect and remove the jumper
cables in the correct order, making sure that
the cables do not touch each other or other metal.
A. Heavy, Unpainted Metal Engine Part or Remote
Negative (−) Terminal
B. Good Battery or Remote Positive (+) and Remote
Negative (−) Terminals
C. Dead Battery or Remote Positive (+) Terminal
To disconnect the jumper cables from both vehicles, do
the following:
1. Disconnect the black negative (−) cable from the
vehicle that had the dead battery.
2. Disconnect the black negative (−) cable from the
vehicle with the good battery.
3. Disconnect the red positive (+) cable from the
vehicle with the good battery.
4. Disconnect the red positive (+) cable from the other
vehicle.
5. Return the underhood fuse block cover to its
original position, if applicable.
Jumper Cable Removal
812553
284
2008 - Saturn VUE Owner Manual (July 23, 2007)