JOBNAME: 1st Edition PAGE: 90 SESS: 2 OUTPUT: Tue Jul 24 09:46:13 2007
Notice: SIO-ID=1891165 LMD=02-apr-2007 Certain
cleaners contain chemicals that can damage the
emblems or nameplates on your vehicle. Check the
cleaning product label. If it states that it should
not be used on plastic parts, do not use it on your
vehicle or damage may occur and it would not
be covered by the warranty.
Do not wash the vehicle in direct sunlight. Use a car
washing soap. Do not use cleaning agents that
are petroleum based or that contain acid or abrasives,
as they can damage the paint, metal or plastic on
your vehicle. Approved cleaning products can be
obtained from your dealer/retailer. See Vehicle
Care/Appearance Materials on page 337. Follow all
manufacturers’ directions regarding correct product
usage, necessary safety precautions and appropriate
disposal of any vehicle care product.
Rinse the vehicle well, before washing and after to
remove all cleaning agents completely. If they are
allowed to dry on the surface, they could stain.
Dry the finish with a soft, clean chamois or an all-cotton
towel to avoid surface scratches and water spotting
High pressure car washes may cause water to enter the
vehicle. Avoid using high pressure washes closer
than 12 inches (30 cm) to the surface of the vehicle.
Use of power washers exceeding 1,200 psi (8 274 kPa)
can result in damage or removal of paint and decals.
Cleaning Exterior Lamps/Lenses
OIE-ID = 1341266 Owner = tlerma01 LMD = 05-jun-2003 LMB = cturf01
Use only lukewarm or cold water, a soft cloth and a car
washing soap to clean exterior lamps and lenses.
Follow instructions under Washing Your Vehicle on
page 333.
Finish Care
OIE-ID = 1825662 Owner = tlerma01 LMD = 05-may-2006 LMB = skinle01
Occasional waxing or mild polishing of your vehicle by
hand may be necessary to remove residue from the
paint finish. You can get approved cleaning products
from your dealer/retailer. See Vehicle Care/Appearance
Materials on page 337.
If your vehicle has a basecoat/clearcoat paint finish, the
clearcoat gives more depth and gloss to the colored
basecoat. Always use waxes and polishes that are
non-abrasive and made for a basecoat/clearcoat paint
finish.
Notice:
SIO-ID=818336 LMD=13-mar-2003 Machine
compounding or aggressive polishing on a
basecoat/clearcoat paint finish may damage it. Use
only non-abrasive waxes and polishes that are
made for a basecoat/clearcoat paint finish on your
vehicle.
334
2008 - Saturn VUE Owner Manual (July 23, 2007)
To Next Page
Loading...
Need help?
General
