Saturn VUE 2008 User Manual

JOBNAME: 1st Edition PAGE: 49 SESS: 1 OUTPUT: Tue Jul 24 09:46:13 2007
4. Push the new bulb into the bulb socket assembly.
5. Insert the bulb assembly into the headlamp
assembly.
6. Turn the bulb assembly clockwise until seated.
7. Reverse the steps to reinstall the headlamp
assembly.
Taillamps, Turn Signal, Stoplamps
and Back-up Lamps
OIE-ID = 1844473 Owner = mcross01 LMD = 03-apr-2007 LMB = mcross01
To replace one of these bulbs:
A. Taillamp/Stoplamp
B. Turn Signal Lamp
C. Back-up Lamp
1. Open the liftgate.
2. Remove the two screws holding in the taillamp
assembly.
3. Slide the taillamp assembly rearward and away
from the vehicle.
4. Turn the bulb socket being replaced
counterclockwise to disconnect it.
5. Pull the bulb out of the bulb socket.
6. Push the new bulb into the bulb socket.
7. Reverse Steps 2 through 4 to reinstall the taillamp
assembly.
1843360
1849082
293
2008 - Saturn VUE Owner Manual (July 23, 2007)

Saturn VUE 2008 Specifications

General

Brand	Saturn
Model	VUE 2008
Category	Automobile
Language	English