Sauder 401291 - Page 11

å
Fasten the RIGHT END (A2) to the RIGHT MOLDING (R).
Use two BLACK 1-7/8" FLAT HEAD SCREWS (NN).
å
NOTE: Be sure the CAM DOWELS in the BACKS (XX)
insert into the holes in the RIGHT END. Do not tihten the
HIDDEN CAMS at this time.
Step 6
401291www.sauder.com/services
Pae 11
XX
XX
A2
BLACK 1-7/8" FLAT HEAD SCREW
(2 used in this step)
NN
R
Finished ede