Sauder 401291 - Page 12

Step 7
401291 www.sauder.com/servicesPae 12
BLACK 9/16" LARGE HEAD SCREW
(16 used in this step)
RR
A2
B2
AA
AA
M58
M58
Surface with ANGLE BRACKETS
Surface with ANGLE BRACKETS
M58
M58
å
Fasten eiht ANGLE BRACKETS (AA) to the BRACES (M58).
Use eiht BLACK 9/16" LARGE HEAD SCREWS (RR).
å
NOTE: Be sure the ANGLE BRACKETS are even with the
edes of the BRACES.
å
Fasten the BRACES (M58) to the ENDS (A2 and B2). Use
eiht BLACK 9/16" LARGE HEAD SCREWS (RR) throuh the
ANGLE BRACKETS and into the ENDS.