Sauder 401291 - Page 13

Step 8
401291www.sauder.com/services
Pae 13
å
Fasten the TOP (C2) to the MOLDINGS (M77, R, and S).
Use seven SILVER 1-1/8" FLAT HEAD SCREWS (OO).
å
NOTE: You should start each SCREW a few turns before
completely tihtenin them. Do not overtihten.
å
Fasten the BASE (M37) to the ENDS (A2 and B2). Use
four BLACK 9/16" LARGE HEAD SCREWS (RR) throuh
the METAL BRACKETS and into the BASE.
BLACK 9/16" LARGE HEAD SCREW
(4 used for the BASE)
RR
SILVER 1-1/8" FLAT HEAD SCREW
(7 used for the TOP)
OO
Do not overtihten
the SCREWS (OO).
A2
B2
S
M77
R
Finished surface
C2
M37
Surface
with holes
Flat ede
Unfi nished ede
Don't worry. It isn't
Rome. This can be built
in a day.