Sauder 401291 - Page 18

Step 13
å
Fasten a DRAWER RIGHT (35AC) to the SMALL DRAWER RIGHT SIDE (D245) and a DRAWER LEFT (35AD) to the
SMALL DRAWER LEFT SIDE (D271). Use four GOLD 5/16" FLAT HEAD SCREWS (TT) throuh holes #1 and #2.
å
NOTE: The parts are marked "DRAWER RIGHT" and "DRAWER LEFT" for easy identifi cation.
å
NOTE: The lides are not intended to rotate.
å
Fasten the KNOBS (KK) to the SMALL DRAWER FRONT (L2). Use two SILVER 7/8" MACHINE SCREWS (PP).
401291 www.sauder.com/servicesPae 18
SILVER 7/8" MACHINE SCREW
(2 used for the KNOBS)
PP
KK
L2
1
2
1
2
GOLD 5/16" FLAT HEAD SCREW
(4 used in this step)
TT
Glide end
Glide end
D271
D245