Sauder 401291 - Page 19

Step 14
401291www.sauder.com/services
Pae 19
MM
LL
LL
G2
å
Fasten a DRAWER RIGHT (35AC) to the LARGE DRAWER RIGHT SIDE (D22) and a DRAWER LEFT (35AD) to the
LARGE DRAWER LEFT SIDE (D23). Use four GOLD 5/16" FLAT HEAD SCREWS (TT) throuh holes #1 and #2.
å
NOTE: The parts are marked "DRAWER RIGHT" and "DRAWER LEFT" for easy identifi cation.
å
NOTE: The lides are not intended to rotate.
å
Fasten a PULL (MM) and two PULL MOUNTS (LL) to the LARGE DRAWER FRONT (G2). Use two SILVER 5/8"
MACHINE SCREWS (15S).
å
Repeat this step for the other lare drawers.
Glide end
Glide end
1
2
1
2
D22
D23
SILVER 5/8" MACHINE SCREW
(6 used for the PULLS)
15S
GOLD 5/16" FLAT HEAD SCREW
(12 used in this step)
TT
(4 screws per drawer)